EUROPE


Vibration Controller

K2 Sprint

K2 Sprint

Common hardware supports all types of vibration test.
While inheriting all of the performance and features of K2, K2 Sprint offers improved cost-effectiveness with 2-channel hardware.
K2 Sprint is best-suited to single monitor-channel operation.
[Differences from K2]
●Input 2 channels (No expansion)
●Output 2 channels (No expansion)

Features

Features

■User-friendly interface

Instinctive Operation

[Intuitive operation]

Easily-recognised icons are used for file management.

Simplified definition

[Short-cut operations]

The key operations are initiated using a simplified set of commands.

Help

[Scheduler]

Define the test schedule and execute it in order.

■Easy-to-use functions

Web monitor

[Web monitor]

A user can monitor a vibration test remotely by connecting over the internet.

Report generator

[Report generator]

Results can be exported to Microsoft Word in a range of customised formats.

■Precision control capabilities
K2 employs high-resolution 24-bit A/D and D/A converters to achieve high-precision, repeatable control.
■Safety interlock function
A hardware mute function operating independently of software provides complete protection for the vibration system and payload.
■E-mail notification
Remote sites can be notified by email of any abnormality during testing or termination of a test.
■DataViewer
Software to display result data file saved after the test of SINE, RANDOM and SHOCK.

Software

Software

Common optional software Outline
CAPTURE:
Analogue waveform
signal data program

Provides analogue waveform signal capture, saved data can then be used as the reference of
SHOCK, BMAC waveform controls or Random vibration PSD control.

• Sampling Frequency 51.2kHz maximum
• Data Length Maximum 5000k points
• Input Channel Maximum 64
• Waveform edit/analysis function Filtering, Frequency transfer processing, PSD transfer,
Transmissibility ratio between channels
SCHEDULER:Test scheduler Pre-defined tests can be executed in sequence.
TCP Communication Server TCP communication server software that allows external applications to operate K2 applications and acquire vibration data and operating status by sending and receiving commands via TCP / IP.

Specifications

Main Enclosure
AC Power Single-phase AC, 100V-240V (Auto-selected)
External Communication Contact I/O (for Emergency stop)
Ambient Conditions 0-40℃, below 85% RH, no condensing
Dimensions W345 x H40 x D210mm (excluding connectors etc)
Mass Approximately 6.0kg
●Input Section
Number of Channels 2
Input Connector BNC
Input Signal
Charge, Voltage, IEPE
Charge Amplifier Sensitivity 1.0mV/pC or 10mV/pC
Charge Amplifier Cut-off 0.32Hz
Maximum Input Charge Input ±10000pC or ±1000pC
Voltage Input ±10000mV
IEPE Input ±10000mv
Sampling Frequency 51.2kHz maximum
Voltage Input Coupling AC or DC
AC Coupling Cut-off 0.1Hz
CCLD Amplifier(IEPE) +24VDC,3.5mA
TEDS(IEPE) Version0.9,Version1.0
A/D Converter Type : ΔΣ
Resolution : 24-bit
Dynamic Range: 117dB
Digital Filter : Pass-band ripple ±0.001dB
: Stop-band attenuation 110dB
●Output Section
Number of Channels
2 (a channel is occupied for drive output)
Output Terminal BNC
Output Signal
Voltage
Maximum Output
±10000mV
Sampling Frequency
51.2kHz maximum
D/A Converter Type : ΔΣ
Resolution : 24-bit
Dynamic Range: 120dB
Digital Filter : Pass-band ripple ±0.005dB
: Stop-band attenuation 75dB

Minimum Specifications for PC

  • ● One built-in PCI Express x1 slots
  • ● Microsoft Windows 10 Pro ( 64bit )、Windows 10 IoT Enterprise ( 64bit ) or Windows 7 Professional SP1 ( 32bit/64bit ) is required*.
  • ● Memory required ( for 8 input channels )
    Windows 7 ( 32 bit ) :2 GB or more
    Windows 7/10 ( 64 bit ) :4 GB or more
  • ● DVD-ROM Drive ( required for installation )
  • ● One USB port
  • ● PC and monitor resolution should be 1280 x 1024 or more
  • * Recommended OS and memory vary depending on software, options , number of I/O channels, etc.
  • * When the optional software is added to the Eco Shaker, system requirements for the PC will change.